| Attribute | Details |
|---|---|
| Year of Manufacture | 2023 |
| Working Hours | 1800 hours |
| Condition | normal(regular maintenance done) |
| Maintenance | Regular service, no issues reported |
| Location | Available in North America |
| Storage | Stored indoors, well maintained |
| Ready for Use | Fully functional, no repairs needed |
Description
The Caterpillar 320 GC focuses more on low fuel consumption and low maintenance costs, and is suitable for light to medium-sized excavation operations. The following are the specific sales introduction and specifications:
• Superior Performance: Equipped with a C4.4 engine with a net power of 128.5kW. The advanced hydraulic system achieves a balance between power and efficiency. Combined with power mode and intelligent mode, it can accurately match the operation requirements. The Advansys™ bucket tooth tip has strong penetration ability and short cycle time.
• Intelligent Technology: Equipped with Cat Grade 3D reserved device, 3D system can be optionally installed. Cat Payload can realize weighing while driving, and the Advanced Payload function is more abundant. The user interface is operator-oriented, easy to operate, and can quickly set construction machinery tools.
• Easy Maintenance: Maintenance intervals are extended and more synchronized, and daily maintenance can be completed on the ground. With the Cat Inspect mobile application, digital preventive maintenance checks can be easily performed.
• Strong Adaptability: It can work in high temperature environments up to 52°C, with cold start capability as low as –18°C, and a –32°C start kit can be optionally installed, which can adapt to a variety of complex environments.
• Economic Fuel Consumption: Reduce fuel consumption through the combination of low engine speed and large hydraulic pump. Compared with the 320F, the fuel consumption can be reduced by up to 20% in the same application scenario.
• Reliable and Durable: Complies with the Brazilian MAR-1 emission standard equivalent to US EPA Tier 3 and EU Stage IIIA (in some regions), or meets the US EPA Tier 4 final and EU Stage IV emission standards (in some regions). It can work at an altitude of 3000m, with track pins and bushings sealed with grease, and the chassis system has a long service life.
• Low Maintenance Cost: Compared with the 320D2 GC, the expected maintenance cost is lower. The replacement interval of the hydraulic oil filter is as long as 3000 hours, and the engine maintenance interval can be extended to 1000 hours.
• Comfortable Operation: Equipped with a roll-over protective structure cab, which complies with ISO standards. The 8-inch touch screen monitor is easy to operate. The joystick buttons can be programmed through the operator ID, and it can also remember the climate control fan and radio settings. A rear-view camera is standard, and a right-side camera can be optionally installed.
• Engine: Model C4.4, net power 109.1kW, displacement 4.4L, cylinder bore 105mm, stroke 127mm.
• Operating Weight: 20600kg.
• Digging Depth: Maximum digging depth 6630mm.
• Hydraulic System: Hydraulic system 234L, hydraulic oil tank 115L, swing speed 11.3r/min.
• Dimensions: Boom extension range 5.7m, stick 2.9m, bucket capacity 1m³, transport height 2950mm, transport width 2980mm, transport length 9530mm.
